- On sale!
Voltero PS6 600Wh solar generator
Never get stuck at home or in the office again. Create your own mobile office in the camp, in nature or by the sea. Now you can decide for yourself how, when and where you want to play or work with your notebook, tablet and phone without running out of power. The battery capacity is 595Wh with LiFePo4 built in battery with +3.500 life cycles
Voltero Smart Powering
Voltero stands for quality and our products are the best proof of it.
Never get stuck at home or in the office again. Create your own mobile office in the camp, in nature or by the sea. Now you can decide for yourself how, when and where you want to play or work with your notebook, tablet and phone without running out of power. The battery capacity is 595Wh with LiFePo4 built in battery with +3.500 life cycles.
Get used to being able to work at full speed anywhere as this powerhouse is fully up to date with the latest technologies. The Voltero PS6 solar generator is equipped with newest LiFePo4 batteries. It has also a 600W pure sine inverter with 1.000W surge power. Voltero PS6 also offer USB-C PD2.0 PPS power output max 60W and 2 x USB A port with max 18W. But that is not all. PS6 has alo 3 x 12V ports. 2 ports are DC 5.5 x 2.1mm with 12V 10A. There is also a cigarette lighter port available. So total output on all 3 12V ports is 120W. You can connect 3 devices with each 40W or 1 with 120W.
The electric generator large color LED display provides a real-time battery power monitoring system to help you keep track of the power level status. including remaining cell capacity, current input and output, battery status while charging and accurately displaying the remaining working time of the Voltero PS6 station during work (accurate to the minute)
The Voltero PS6 solar battery generator has five ways to recharge: the wall outlet (100W), USB-C Port (you can use our C65 or C100 wall chargers), car charging, solar panel, and USB-C (60W) + Wall Outlet (100W). When you use the dual-port, just USB-C + wall outlet for charging, it only takes 3.5 hours for the portable charging station to quickly charge from 0-80%.
Voltero PS6 solar generator can charge all USB-C devices. In the package there is no USB C cable included. You can buy additionally our Voltero C1 (1 meter length) and C2 (2 meter length) PD3.0 100W 10Gbps data cable
Charging and using at the same time is possible
Solar charging is possible
Voltero PS6 can also be charged with our solar panels like Voltero S110 and Voltero S220. Voltero S370 and Voltero S420 panels cannot be connected directly to Voltero PS6 because they have to high voltage. However you can use S370 and S420 to charge the PS6 with USB C port.
For example S370 and S420 have built in 60W PD charger, so in optimal conditions you can charge PS6 with only USB C within 8 hours.
All Voltero power stations have a built-in MPPT controller.
Voltero PS6 solar genrator 600W features 1 x 230V/600W AC output (Pure sine wave), so it can power most devices under 600W.
Working time (estimation) = 595Wh* 0.8 / operating power of your device = Hours (0.8=Conversion Rate due to losses).
Please note that the actual working time may vary under different situations.
Yes, For AC output, when the output is less than 3W, it will shut down automatically after 8 hours.
For DC output, when the output is less than 50mAh, it will shut down automatically after 4 hours.
For USB output, when the output is less than 30mAh, it will shut down automatically after 3 minutes.
With provided grid charger of 100W it takes around 6 hours to fully charge. If you are charging the unit with our Voltero S110 it also takes 6 hours to fully charge the PS6 in optimal weather conditions. You can also charge the unit with our C65 or C100 GaN chargers. With those power chargers it takes around 10 hours for the C65 and 6 hours for the C100. The unit can be charged up to 80% in 3.5 hours with our grid charger or C100 GaN.
The unit may be in standby mode where the power supply, screen, and/or inverter could be using up to 50W. Remember to long-press the power button to turn the unit completely off. If the unit loses power when completely off, try recharging it to 100% and use it to 0% two or three times to calibrate the battery.
If the problem persists, please contact customer support.
When the output over voltag the ports, the overload protection switch button will automatically pop out. You need to turn off the power switch button, then turn it on again. It will reset the unit.
The station has built-in smart and silent cooling fan, so during use the fan will be automatically turned on when the unit is hotter to maintain the unit, when the temperature drops to a certain level, the fan will be turned off.
Voltero has wide compatibility with other brands of solar panels, as long as the combined open rated voltage range is within 12-30V, 250w Max.
Due to the different sizes of Power Stations & Solar Panels, we will ship separately if your order has multiple products including portable power stations and solar panels.
- When the control buttons are turned on, even if no devices are being charged, there will still be a certain amount of no load power consumption. Therefore, it is recommended to turn off the control buttons after using them to avoid draining power.
- If you feel that the battery drains fast when used for the first time, it is because the display information of the remaining power is inaccurate when the product is activated for the first time. The power remaining will automatically calibrate by discharging the battery to 1% and then recharging it to 100%
- Battery capacity - mAH
- Output power max - W
- Amount outputs
You might also like